Pioneers of innovation: The battery that changed the world

If you are reading this on a phone, tablet or laptop, you should probably thank Dr. M. Stanley Whittingham. In the 1970s Dr. Whittingham was working at ExxonMobil’s Clinton, New Jersey, corporate research lab when he created the very first examples of a radical new technology: the rechargeable lithium-ion battery.

Perspective Oct. 10, 2019

This article was originally published in 2016. M. Stanley Whittingham was awarded the Nobel Prize in Chemistry on October 9, 2019, and the following has been updated to reflect this news.

For this groundbreaking work, Dr. Whittingham was awarded the 2019 Nobel Prize in Chemistry along with Dr. John Goodenough of the University of Texas at Austin and Dr. Akira Yoshino of Meijo University in Nagoya, Japan. Today, Whittingham is a Distinguished Professor of Chemistry and Materials Science at Binghamton University in New York.

Prior to joining Binghamton, Dr. Whittingham worked at ExxonMobil, where his research paved the way for the development of the rechargeable lithium-ion battery. Specifically, he and his team discovered that when lithium ions were held between plates of titanium sulfide, the ions could move back and forth between the positive and negative contacts, creating electricity.

With lithium-ion batteries, “we have gained access to a technical revolution,” said Sara Snogerup Linse, a professor of physical chemistry at Lund University in Sweden who chairs the Nobel committee for the chemistry prize.

Evolving the battery design

Rechargeable batteries had been around for decades when Whittingham first proposed his version. But the rechargeable batteries at that time were bulky lead-acid cells – the kind still found in many cars today. And although the disposable carbon zinc batteries that power your remote control were prevalent, replacing them after each charge of a more energy-hungry device like a computer would be both annoying and expensive.

That’s what put Whittingham at the forefront of battery innovation.

Early research had suggested that the highly reactive metal lithium could be used to store energy, but Dr. Whittingham was the first to figure out how to make it happen at room temperature without the risk of explosion. His original design used titanium sulfide, a 2.5-volt material, and the intercalation design (or insertion of ions in a removable way) was sound and provided the basis for modern lithium-ion batteries.

Image Dr. Whittingham in 1979 in an Exxon Research and Engineering publication. Right, Dr. Whittingham today as professor at Binghamton State University. Image credits: ExxonMobil, Dr. M. Stanley Whittingham
Dr. Whittingham in 1979 in an Exxon Research and Engineering publication. Right, Dr. Whittingham today as professor at Binghamton State University. Image credits: ExxonMobil, Dr. M. Stanley Whittingham

In 1980, Dr. Whittingham worked with fellow Nobel laureate Dr. Goodenough at the University of Texas in Austin to improve his initial breakthrough by using metal oxides and higher, 4-volt materials. Building on that work on the other side of the world in Japan, Dr. Yoshino was able to develop the first commercial lithium-ion battery.

Powering technology for batteries

The high-energy-density lithium-ion technology now powers laptops, tablets, cellphones and most electric cars. It even allows solar-powered aircraft like the record-setting Solar Impulse 2 to continue flying after the sun has set. Power grids that are based on inconsistent power sources like wind or solar power are also beginning to rely on massive lithium-ion batteries to store energy for times when demand exceeds output.

Dr. Whittingham, Dr. Goodenough and Dr. Yoshino built on each other’s work and turned breakthrough research into an innovation that’s transformed how the world uses and stores energy.

Image credit: ExxonMobil Historical Collection, [identifier number: di_10643-di_10650], The Dolph Briscoe Center for American History, The University of Texas at Austin

SOURCES

Explore more

Engineering solutions to the plastic waste challenge

Engineering solutions to the plastic waste challenge

When people ask me what I do, I usually give the easy answer: “I’m an engineer.” What that really means is my work is about finding solutions. We engineers use our technical expertise to enhance products and processes, develop novel technologies and try to find solutions to complex challenges.

Energy and innovation Perspective Dec. 14, 2020

Dr. Vijay Swarup headshot

Solving the dual challenge: It takes patience and passion

ExxonMobil’s role in helping society meet the dual challenge is to supply the affordable and reliable energy the world needs while reducing environmental impacts. Doing that takes long-term research and a dedication to turning promising innovations into scalable solutions.

Energy and innovation Perspective July 23, 2020

The new generation of innovators creating next-generation energy

The new generation of innovators creating next-generation energy

Tucked in the hills of Berkeley, California, a cluster of nascent entrepreneurs is collectively hanging out their shingles. And while ensconced in Silicon Valley’s dynamic startup culture and technological marketplace, these new business owners are focused exclusively on clean energy, electronics and manufacturing innovations. Welcome to Cyclotron Road, a fellowship ...

Energy and innovation Perspective May 17, 2018

Algae and advanced biofuels

Algae and advanced biofuels

Scientists at ExxonMobil are working to transform algae and plant waste into biofuels that could one day be used for transportation. These advanced biofuels offer the possibility of achieving significant greenhouse gas reductions compared to today’s transportation fuels.

Energy and innovation Article

Biomedical Sciences: Protecting people and the planet

At ExxonMobil Biomedical Sciences, Inc. (EMBSI), our mission is to understand, research, and develop health, environmental, and product safety options and solutions for our company and the communities we serve.

Energy and innovation Topic